2021 model · Setup documented 2021–2022

WTP
Trust FC.

An 18-photo record of the raw build: frame graphics, cockpit and wheel alignment, an additional matching pair of the stock pegs, handlebars shortened at the saw, small-part finishing, and the final purple-rim configuration. Added components were kept European in almost all cases to match what was already on the bicycle.

Final configurationRaw / black / purple
modelWTP Trust FC
year2021
componentsMostly European
pegsStock pair added

Frame + identifiers

Raw finish,
documented up close.

The record starts with the WTP shipping box, then moves across the frame graphics, headtube, and seat before the complete-bike checks begin. Added components were kept European in almost all cases so their origin stayed consistent with the existing build.

01 WTP box arrives
02 Frame graphic
03 Opposite side
04 Headtube centerline
05 Saddle + rear line

Alignment

Check every line
from the rider’s view.

Top-down cockpit, stem, fork, and tire views establish the centerline before full side profiles document the first complete configuration.

01 Cockpit line
02 Stem line
03 Fork + tire
04 First outdoor profile
05 Indoor profile

Pegs + cockpit width

Stock pegs added.
Bars cut shorter.

The next pass adds another matching pair of the stock pegs already used on the bike, checks the setup outdoors from both side and front-quarter angles, then shortens the handlebars at the saw before another centered front check.

01 Stock pegs installed
02 Front-quarter check
03 Shorten the bars
04 Recheck the front

Small-part finish

Mask,
then spray.

A small part is isolated with tape inside a cardboard booth, then sprayed black to disappear into the surrounding component palette.

01 Mask
02 Spray

Final configuration

Raw frame.
Purple rims.

The final catalog pair records the full side profile and a centered front detail with the additional matching pair of stock pegs installed.

01 Collection profile
02 Final front detail